S-0808 SpecificationsNumber of Channels8 in 8 outAD/DA ConversionSample Rate: 96.0 kHz / 48.0kHz / 44.1kHz Signal Processing: 24 bitsFrequency Response-2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz)Total Harmonic Distortion + Noise0.04 % or less (Pad: On, Input Gain: +4 dBu, 22 Hz to 20 kHz)Dynamic Range110 dBCross Talk-80 dB or less (Input Gain: +4 dBu, typ.)Nominal Input Level-65 to -10 dBu (PAD: Off), -45 to +10 dBu (PAD: On) (1 dB step, Max. +28 dBu)PAD20 dB On/OffInput Impedance600 ohmsRecommended Load Impedance10 k ohms or greaterResidual Noise Level (IHF-A, typ.)-80 dBu or lessEquivalent Input Noise Level (E.I.N.)-128 dBNetwork Latency375 microseconds when using REAC cable only *1 (AD - REAC - DA Latency: about 1.2 ms)ConnectorsInput x 8 (XLR type, balanced, phantom power, INPUT 1-8) Input x 2 (TRS type, balanced, INPUT 5/6) *2 Input x 2 (TRS type, balanced, with Hi-Z switch, INPUT 7/8) *2, *3 Output x 8 (XLR type, balanced) REAC EMBEDDED POWER x 1 (RJ-45 EtherCon type) REMOTE x 1 (RS-232C, DB-9 type), DC IN x 1 (XLR 4pin type)Power SupplyREAC EMBEDDED POWER or External Battery (DC 12V - 18V)Power Consumption24 W** Note that if using third-party PoE swtiches or injectors, ensure they can supply the minimum power.Phantom Power+48 V / 14 mA (each input, remote controlled)AccessoriesBattery Plate Holder and Fastening Screws (8 pcs), REAC Connector Covers x 1 Ferrite Core x 2, Fastening Screw x 4, Owner's Manual *1: XLR connector 1: GND, 2: HOT, 3: COLD *2: TRS takes priority if XLR and TRS are simultaneously input to INPUT 5-8. *3: TRS of INPUT 7/8 turns to unbalanced when Hi-Z is turn on. * When a REAC Splitter S-4000-SP or a switching hub is used in-line with REAC cables, the network latency will increase by the amount of processing delay introduced by the splitting device itself. The actual delay is dependant upon the specifications of the splitting device, though the maximum delay amount for a single splitting device should be about 200 microseconds. (0 dBu = 0.775 Vrms)Size and WeightWidth220 mm8-11/16 inchesDepth176 mm6-15/16 inchesHeight157 mm6-3/16 inchesWeight2.9 kg6 lbs. 7 oz.