
ID: 188795 | Ref: ATVM95SPH |
Disponível desde: 2020-01-15
O kit combinado AT-VM95SP / H inclui o cartucho magnético duplo AT-VM95SP pré-montado no cabeçote AT-HS6BK. &nbs...
AT-VM95SP/H
VM95 series 78rpm SP cartridge on AT-HS6 Headshell
- AT-VM95SP mounted on AT-HS6BK headshell
- The total set weight is 15.5g
- Assembled and tested in the Audio-Technica Factory in Fukui-Japan
Every cartridge diamond stylus becomes worn after a period of play.
Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.
Model
AT-VM95SP/H
Type VM Stereo Dual Magnet
Mounting 1/2” centres
Frequency Response 20 - 20,000 Hz
Output Channel Balance
1.5 dB (1 kHz)
Output Voltage 2.7 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle 23°
Vertical Tracking Force Range 4.5 - 5.5g (standard 5.0g)
Stylus Shape SP 3 mil Conical Bonded
Stylus Size 3 mil
Stylus Construction
Bonded Round Shank
Cantilever Aluminium Pipe
Coil Impedance
3.3 kΩ (1 kHz)
Coil Inductance
550 mH (1 kHz)
DC Resistance 485 Ω
Static Compliance
12 x 10 – 6 cm / dyne
Dynamic Compliance 2 x 10 – 6 cm / dyne (100 Hz)
Wire Used for Coil T.P. Copper
Recommended Load Impedance 47,000 Ω
Recommended Load Capacitance
100-200 pF
Weight
15.5 g
Dimensions
21.2 × 21.4 × 62.4 ( H x W x D mm)
Replacement Stylus AT-VMN95SP
-
119.00€
-
119.00€
Envio grátis acima de 199.00€



Produtos Relacionados
Tags: Audio-Technica AT-VM95SP/H, ATVM95SPH, Células